Image: DVP Vacuum Technology
- Pumping speed
- 14 m³/h
- Ultimate pressure
- 50 mbar
- Motor power
- 0.54 kW
Headline ratings converted to common units for comparison; the table below shows each figure exactly as published.
Technical data
Source: DVP Vacuum Technology product page · retrieved 2026-10-05| As published | 50 Hz | 60 Hz | absolute |
|---|---|---|---|
| Nominal capacity Pumping speed | |||
| Total final pressure Ultimate pressure | |||
| Motor power |
Original extracted values are shown with their source and review status. Multiple values under the same condition remain separate for review.
Explore the parts
LC 12WR, pulled apart
This model’s parts, by where they sit
Our drawing of the machine type, with the LC 12WR's own parts from DVP Vacuum Technology's lists. Side view along the shaft. Oil-free (dry) pumps have no exhaust box oil, sight glass or oil filter; their exhaust filter is a dust filter.
Reviewed operating performance · 60 Hz
Loading reviewed performance…
Documents
- C.9690042LC12WRother · 1 pp
- 8711102 9690042 LC12WRparts-list · 3 pp
Documents open on the manufacturer’s site.
Service parts · 49
Filtration9
Seals and gaskets4
Fittings and hardware13
Lubrication1
Motor and drive1
Part numbers from DVP Vacuum Technology’s parts lists, shop and instruction manuals. Open a part for its other models, replacements and suppliers.
Parts diagrams
Exploded views from DVP Vacuum Technology’s own documents, with each position and part number as printed. Select a part to see what it fits, who sells it and what replaces it.
Exploded view · 8711102 9690042 LC12WR, page 349 positions · own page
Click a part or its number. Drag to move, pinch or Ctrl + scroll to zoom. Arrows step through positions in the manufacturer's numbering (not an assembly sequence). The manufacturer's drawing shows the parts already pulled apart and gives no assembled positions; Vac & Air does not invent them. Positions were placed automatically from the manufacturer's numbering.
Select a part on the drawing or in the list to see its number, what it fits and where to get it. Turn on “select several” to build one quote for many parts.
| Pos. | Part number | Description | Qty |
|---|---|---|---|
| 0101016 | Screw TCCE M5x30 | ||
| 0304008 | Washer 1/8" | ||
| 0305005 | Copper washer 1/8" | ||
| 0306004 | Washer 1/2" | ||
| 0501002 | Seeger I20 | ||
| 1001012 | O-ring 2093 NBR | ||
| 1001053/V | OR 2200 VITON | ||
| 1001075 | OR 132 VITON | ||
| 1105010 | Oil level sight | ||
| 1105011 | Oil sight glass 1/2”G | ||
| 1110010 | Knob 1/2"G + O-ring FKM | ||
| 1703027 | Oil recovery valve | ||
| 1802020 | Sinterized filter | ||
| 1802026 | Net cap | ||
| 2001003 | Fitting 1/2"G-1/4"GF | ||
| 2001008 | Elbow 3/8"GM-1/4"GF | ||
| 2001025 | Riduction fitting 1/2"G-1/4”G | ||
| 2101008 | Elbow fitting M-F 3/8"G | ||
| 2101036 | Elbow | ||
| 2107001 | Drain valve 1/4"G | ||
| 2204001 | Nozzle | ||
| 3001135 | Body pump | ||
| 3101030 | Rotor | ||
| 3302042 | Vane | ||
| 4101019 | Elbow 3/4"GM-3/8"GF | ||
| 0907001 | Shaft seal 20-42-7 FKM | ||
| 2401022 | Bearing 6205-ZZ | ||
| 4301080 | Motor flange | ||
| 4503005 | Filter plate | ||
| 4505026 | Plate stopper | ||
| 4505027 | Rubber stopper FKM | ||
| 4507020 | Filter cover | ||
| 4508014 | Inlet flange | ||
| 4604043 | Plate | ||
| 4604044 | Plate holder | ||
| 4701037 | Spring | ||
| 4807008 | Tapered ring | ||
| 4901064 | Gasket | ||
| 5001008 | Pipe | ||
| 5202134 | Oil tank | ||
| 9001028 | Separator filter | ||
| 1001010 | OR 2050 NBR | ||
| 1001025 | OR 3281 NBR | ||
| 1801019 | Filter cover | ||
| 4501018 | Filter cover | ||
| 4502016 | Filter bowl | ||
| 4507014 | Filter drain cap | ||
| 9001033 | Exhaust filter | ||
| 9007029 | Gas Ballast |
Positions and part numbers as printed in DVP Vacuum Technology’s 8711102 9690042 LC12WR, page 3 · view the source document