Image: DVP Vacuum Technology
- Pumping speed
- 29 m³/h
- Ultimate pressure
- 0.5 mbar
- Motor power
- 0.9 kW
Headline ratings converted to common units for comparison; the table below shows each figure exactly as published.
Technical data
Source: DVP Vacuum Technology product page · retrieved 2026-10-05| As published | 50 Hz | 60 Hz | Value | absolute |
|---|---|---|---|---|
| Nominal capacity Pumping speed | ||||
| Maximum water vapour pumping rate Water vapour tolerance | ||||
| Total final pressure Ultimate pressure | ||||
| Motor power |
Original extracted values are shown with their source and review status. Multiple values under the same condition remain separate for review.
Explore the parts
LC 25, pulled apart
This model’s parts, by where they sit
Our drawing of the machine type, with the LC 25's own parts from DVP Vacuum Technology's lists. Side view along the shaft. Oil-free (dry) pumps have no exhaust box oil, sight glass or oil filter; their exhaust filter is a dust filter.
Reviewed operating performance · 60 Hz
Loading reviewed performance…
Documents
- C.9601065LC25 6other · 2 pp
- 8711030 9601065 LC25 6parts-list · 3 pp
Documents open on the manufacturer’s site.
Service parts · 37
Seals and gaskets6
Fittings and hardware3
Housing and covers5
Lubrication1
Motor and drive1
Part numbers from DVP Vacuum Technology’s parts lists, shop and instruction manuals. Open a part for its other models, replacements and suppliers.
Parts diagrams
Exploded views from DVP Vacuum Technology’s own documents, with each position and part number as printed. Select a part to see what it fits, who sells it and what replaces it.
Exploded view · 8711030 9601065 LC25 6, page 337 positions · own page
Click a part or its number. Drag to move, pinch or Ctrl + scroll to zoom. Arrows step through positions in the manufacturer's numbering (not an assembly sequence). The manufacturer's drawing shows the parts already pulled apart and gives no assembled positions; Vac & Air does not invent them. Positions were placed automatically from the manufacturer's numbering.
Select a part on the drawing or in the list to see its number, what it fits and where to get it. Turn on “select several” to build one quote for many parts.
| Pos. | Part number | Description | Qty |
|---|---|---|---|
| 0402002 | Stud bolt M8x25 | ||
| 0403003 | Eyebolt | ||
| 0501002 | Seeger I20 | ||
| 0601003 | Cylindric pin Ø5x18 | ||
| 1001032/V | OR 3475 FKM | ||
| 1001053/V | OR 2200 VITON | ||
| 1001075 | OR 132 VITON | ||
| 1001076 | OR 109 VITON | ||
| 1105004 | Oil sight glass 1"G | ||
| 1110007 | Plug 1/8" with gasket viton | ||
| 1110010 | Knob 1/2"G + O-ring FKM | ||
| 1503004 | Shock mount M8 | ||
| 1801073 | Puryfing filter | ||
| 1802008 | Filter 1/8" | ||
| 3001136 | Pump housing | ||
| 3101031 | Rotor | ||
| 3202067 | Pump cover | ||
| 3302032 | Vane | ||
| 0901016/V | Shaft Seal 25-37-5 FKM | ||
| 2401014 | Bearing 6306-ZZ | ||
| 4301083 | Motor connection | ||
| 4503005 | Filter plate | ||
| 4505023 | Laminate shutter | ||
| 4505025 | Rubber shutter | ||
| 4507020 | Filter cover | ||
| 4508057 | Connection inlet | ||
| 4604046 | Shutter holder | ||
| 4604056 | Shutter | ||
| 4701038 | Spring | ||
| 4807009 | Conical ring | ||
| 4901065 | Gasket | ||
| 4901078 | Gasket | ||
| 4901105 | Gasket | ||
| 5202061 | Oil tank cover | ||
| 5202097 | Half oil tank | ||
| 5202098 | Half oil tank | ||
| 9007032 | Gas Ballast valve 1/8"G |
Positions and part numbers as printed in DVP Vacuum Technology’s 8711030 9601065 LC25 6, page 3 · view the source document